House Grail is reader-supported. When you buy via links on our site, we may earn an affiliate commission at no cost to you. Learn more.

The Essential Construction Tools List: 45 Different Types & Their Uses

essential-construction-tools-list_2

 

essential-construction-tools-list_2 Whether you’re an apprentice carpenter, a contractor looking to build up a toolbox, or a home DIYer looking to knock out some old projects you’ve been putting off for too long, you need some essential construction tools. But unless you’re familiar with all the traditional handyman trades, chances are there are some tools you’re unaware of.

This basic guide will list all the essential construction tools you can imagine. Use it as a guide for reference if you’re wondering what a particular tool is used for or if it’s right for your needs.

divider 6

What Tools Do You Need for a Good Construction Kit or Collection?

No one needs to own every tool ever created. Tools are devices with specific functions; you wouldn’t bring a hammer to a job needing a saw. Therefore, it’s a good thing to think about what you’ll be building or how you’ll be using the tools before setting out to acquire a full toolbox of stuff. What you’d need for a plumbing job is quite distinct from what you would need for a carpentry job, for example.

Professional Use or DIY Construction?

On the surface, there’s no difference between tools you would use for professional purposes (i.e., contracting and construction) compared to DIY home projects. However, there’s often a world of difference in the price and quality.

That’s mostly because professional construction tools are designed to last much longer. A power drill intended to be used for multiple hours every day by a construction crew will necessarily have a bigger battery, be heavier, and offer more torque and precision than a budget-friendly DIY power drill.

construction tools

So, the big difference between professional and DIY construction tools is the quality and durability to a lesser extent. Note that this doesn’t mean you can’t purchase professional-level construction tools for your DIY home project. Just be sure they work within your budget.

Additionally, some construction tools are too bulky and big to be worth using for in-home projects much of the time. Various large saws, power tools, and the like are mostly relegated to construction sites and aren’t suitable for your home or garage.

Mobile or Stationary?

Do you need the tools to be mobile, or can they sit in your garage or at a worksite, only moving when it’s time to pack everything up? Obviously, heavier tools usually provide more power and are better for stationary workshops or sites. Mobile tools can also be great if you pair them with a high-capacity battery and have a tool chest to store them in.

Most contractors will have mobile tools they keep with them from job to job. Home DIYers might have heavier table saws that they keep in their home workshop, on the other hand. Either option is fine, but the important thing is to consider the environment you’ll be using your tools in before making any purchase.

divider 5

Essential Construction Tools List

The types and quantity of tools that anyone in construction might need can vary dramatically. Here’s a breakdown of all the essential construction tools you might need for different tasks.

Hand Tools

Hand tools are any tools that move under your muscle power rather than a battery or generator.

1. Hammers

TEKTON Jacketed Fiberglass Ball Pein Hammer

Hammers are arguably the most iconic tool and are used for pushing in nails, which serve as connecting lynchpins for planks of wood. Hammers come in multiple types, although claw hammers are the most common since they have an additional claw at the back of their head you can use to pull out nails. Sledgehammers have longer handles and bigger heads and are used to demolish material.


2. Wrenches

craftsmen wrench set A wrench is a metal tool normally sized for a particular type of nut or bolt. The metal edges of the open head can grip a nut tightly, which allows the contractor to tighten or loosen it by twisting the tool. Many wrenches are purchased in kits that come in various sizes for all types of nuts.


3. Saws (Manual)

CRAFTSMAN Hand Saw

Manual or hand saws are staple construction tools that can cut lumber and, in rare cases, thin metal like aluminum. Saws are characterized by blades of metal with a row of wedged teeth that create incisions every time you pull the saw up and push it back down. Crosscut saws can make cuts across wood grains. Drywall saws can cut through many types of drywall, and circular saws are cutting plywood and various sizes of lumber.


4. Screwdrivers

TACKLIFE HSS1A Magnetic Screwdriver Set

Screwdrivers come in Flathead and Phillips, though both are used to twist in screws by matching up their heads with the requisite bit. Manual screwdrivers are often better than power drills or electric screwdrivers since their heads are attached to their bodies and don’t fall off.


5. Levels and Measuring Squares

WORKPRO Speed Square

A measuring square (also called a carpenter’s square) is a measuring tool that allows you to measure right angles with a writing utensil. Some measuring squares are combined with levels, which are flat, ruler-like tools that include a small amount of liquid with a bubble that can tell you whether a surface is flat. Other levels are separate and may be included with rulers for accurate measurements.


6. Shovels

shovel A shovel or spade can dig through soil and dirt thanks to the wedge and scoop at one end. Shovels are ideal for yard work and for clearing away trenches to install piping or plumbing materials. They can also be used to clear away some organic debris, like tree roots, thanks to their sharp heads.


7. Pickaxes and Crowbars

Estwing Rock Pick Hammer

A crowbar is a long steel construction tool that can dig up difficult objects in the way of construction work, like tree roots, nails, and other obstructions. It can also be used for regular digging. Pickaxes are hand tools with a sharp, spear-like point on one end and a flatter wedge on the other.


8. Nail Pullers

Crescent 19 Nail Puller

A nail puller is a dedicated version of the puller found on many claw hammers’ heads. These longer construction tools offer extra leverage and can be used to pull out particularly big nails or those that are difficult to yank out with a smaller tool. Some nail pullers are included at the end of crowbars.


9. Measuring Tapes and Rulers

Komelon SM5425 Measuring Tape

These measuring tools allow construction workers and DIYers to measure the sizes and distances of different elements accurately. Rulers are firm and easy to use with a pencil or another writing utensil. Measuring tapes extend for much longer than a 1-foot traditional ruler and can be easily carried on your belt, but they are flexible and made with a “bendy” tape and a right-angle edge to help you hook it around a surface’s edge.


10. Bolster

Dasco 437 4-Inch by 7-Inch Brick Set

Bolsters look like hand shovels to some extent, but they are used to cut through bricks. They feature wider cutting edges that can accurately slice through bricks to separate them for reuse or to break down a wall or building feature. Bolsters can also clear away mortar or grout.


11. Chisel

WORKPRO 3-piece Wood Chisel Set

A chisel is a wedged tool most often used in woodworking projects. It can get rid of bumps on wooden surfaces and remove concrete bumps on concrete surfaces. It can also be used to remove excess concrete after a surface has already been hardened to prevent other construction tools from getting dirty over the same work.


12. Float

Kraft Tool CF269 Teakwood Hand Float

A float is a wooden tool that is used to smooth concrete surfaces after they have been plastered. It has a handle on the top and a smooth wooden surface on the bottom, which is then moved in a circular motion to smoothen or calm the surface of fresh concrete.


13. Hoe

IRWIN Carpenter Pencil, Medium Lead

A hoe is a hand tool that excavates soil and has a history in farming. Construction workers and contractors can use hoes to loosen soil for yard work or dig up tree roots. Hoes typically have wooden handles and metal plates for the head, which sit at a right angle relative to the handle.


14. Pliers

IRWIN VISE-GRIP Diagonal Cutting Pliers

Pliers feature heavy but narrow jaws at the end of a pair of handles, which can apply pressure for twisting and untwisting nuts and bolts. Some pliers can also strip wires, cut cables, bend metal, or act as tough fingers for gripping metallic objects and surfaces.


15. Adjustable Spanner

Wadoy Adjustable C Spanner Hook Wrench

An adjustable spanner is a versatile tool featuring a wrench head that can be opened or closed by spinning a control wheel near the head. The movability of the head allows it to work for almost any size of nut. Plumbers can use these construction tools if they want a one-size-fits-all tool for any plumbing job.


16. Utility Knife

WORKPRO Retractable Utility Knife

A utility knife (particularly a retractable one for safety) is an invaluable manual tool for cutting wire, string, duct tape, and much more. It’s much easier than tearing through many materials with your fingers, and it’s small enough that it can fit in a pocket or on most tool belts without being too heavy or taking up a lot of space.

divider 4

Power Tools

Power tools are more modern inventions that come in corded and cordless varieties. They provide more power and faster performance than hand tools but require an electrical outlet, generator, or battery.

17. Saws (Powered)

DEWALT 7-1:4-Inch Circular Saw with Electric Brake

Powered saws are similar to their manual counterparts but can be corded or cordless. They can cut through workpieces with electric power and thus spin or slice at faster-than-human speeds. They usually have circular saw blades that rapidly rotate to cut through wooden pieces at a rapid pace. Table saws are larger saws with built-in tables on which carpenters place wooden pieces and slide them toward the rotating saw blade for an accurate cut.


18. Drills (Corded and Cordless)

hand using Avid Power MAX Cordless Drill

Power drills are fantastic construction tools that come in corded and cordless varieties. Both use power to rapidly rotate a drill bit to carve a small hole in a material, like wood or metal. Drills can also be used to rapidly screw or unscrew bits from wooden planks or other surfaces. Modern drills come with rechargeable batteries and easy-to-change drill bits to allow them to work with a wide variety of screw sizes, and most operate by pulling a trigger on the handle.


19. Routers

Enertwist Wood Router

A router tool “routes” a specific spot in wood or plastic, essentially hollowing out a small space in a hard material using a rotating drill bit. They are primarily useful for woodworking.


20. Sanders

wood sander
Image: Pxfuel

A sander is a finishing tool for carpentry work. It’s characterized by an abrasive belt stretched between two drums on either side of the sander tool. The belt is then turned by a motor, which rubs the wooden surface. Some sanders are better for back-and-forth finishing motions, while other “orbital” sanders can be used in circular motions.


21. Shop Vacs and Blowers

Stanley 6 Gallon Shop Vac

A shop vac is a powerful vacuum with a big reservoir that can suck up water, debris, and anything else using a long hose that, more often than not, comes with various attachments. Many shop vacs are also blowers, which blow air out via a powerful motor to get rid of leaves, sawdust, and more.


22. Jackhammers

XtremepowerUS Heavy DutyJackhammer

A jackhammer is an electrical tool shaped like the letter “T” that can rapidly drive a wedged hammer up and down into a hard surface to break it apart or pulverize it for easier removal. It’s meant to be used with two hands and only under supervision. Jackhammers are quite loud and require ear protection. They require generators or power outlets to function in most cases.


23. Air Compressors

CRAFTSMAN Air Compressor

An air compressor can blow out highly compressed air to blast away sawdust or other debris from sensitive or tight surfaces.


24. Generators

Westinghouse WGen7500 Portable Generator

A generator is a mobile power source that runs off gasoline or propane to provide electricity to power tools that connect to its apparatus. These generators are often heavy but can be useful for contractors who need to complete work with power tools far from a primary power grid.


25. Concrete Mixer

YARDMAX YM0115 Concrete Mixer

A concrete mixer is a powered tool that can mix the various elements of regular cement (including water, fine and coarse aggregates, and cement ) by rotating a reservoir barrel gently for hours on end. Concrete mixers are typically designed with wheels and handles so they can be moved from place to place on a worksite.


26. Impact Drivers

BLACK+DECKER 20V MAX Impact Driver Kit

An impact driver is an alternative version of a standard electric drill. It delivers a sudden and powerful downward force with a spin to drive a screw or nail into place instantly. They are similar to electric drills, with a handle and trigger and a battery at the bottom.


27. Caulk Guns

Newborn 930-GTD Drip-Free Caulking Gun

Also called skeleton guns, caulking guns deposit a silicone or latex material that can bond materials together or fill gaps. For instance, caulking guns can seal gaps or cracks in metal, ceramic, and glass surfaces. They’re available as battery-powered or pressure-powered models and use disposable tubes of caulk to deposit the material via a long tube-and-plunger apparatus.


28. Oscillating Multi-Tools

DEWALT Oscillating Tool Kit

An oscillating multitool is a versatile device with several attachments and heads that can be swapped out. Depending on the attachments that come with the purchase, an oscillating tool can plunge into and cut through pieces of wood, sand wood, grind materials, polish a surface, act as a saw, and more.


29. Nail Guns

person using nail gun
Image: Wikimedia Commons

Nail guns are power tools that, when loaded with nails via a magazine like a traditional firearm, can project nails into a wooden surface at incredible speeds. They’re ideal for rapidly nailing a wooden board or another material onto a given surface, particularly if that board is thin and easy to nail.

Divider 2

Accessories

Contractors and construction workers need accessories to be safe or complete their tasks with the utmost accuracy.

30. Writing Materials

IRWIN Carpenter Pencil, Medium Lead

Most contractors and professionals need writing materials like pencils and chalk. These are good not only for signing contracts but also for marking out measurements or for marking the length of pipe needed for a maintenance order for a plumbing job.


31. Batteries and Extension Cords

Anker Power Strip

Extension cords or cables are ideal for extending how far a generator can provide power to a power tool or device. For instance, contractors can use them to power a tool on the second floor of the house, even if the generator is on the first floor. Most extension cords are made with durable materials and can reach up to over 300 feet at their longest. Batteries are rechargeable power cells that can provide portable power to construction tools like cordless drills.


32. Sawhorses

TEKTON 4-Inch Swivel Bench Vise

A sawhorse is a wooden or metal structure with four legs and a flat surface that can support a board or other cutting material for sawing. It gets its name from being reminiscent of a horse in shape.


33. Ladders and Stools

Little Giant Ladders Velocity

Ladders are essential construction accessories for contractors or roofers to reach their targets. They can be leaned against buildings and used as climbing apparatuses to achieve greater heights. Stools are similar height-boosting tools that are much smaller and feature a more stable base, allowing a worker or DIYer to reach a room’s ceiling for electrical or plumbing work.


34. Voltage Checker

Klein Tools NCVT-2 Voltage Tester

A voltage checker is a basic handheld sensor that, when the sensor head is placed next to a power outlet or electrical device, can check a current’s voltage. It essentially works through two probes: one must touch half of an electrical connection, and the other must touch the other half. If electricity is flowing, the tester will glow or indicate this and tell you the voltage.


35. Multimeters

person using INNOVA 3320

A multimeter can measure the voltage, current, and resistance of a device like a battery. It’s necessary for contracting work and can be helpful for DIY home repairs, such as fixing a thermostat or another home appliance.


36. Hardhat/Eyeglasses/Gloves

construction worker
Image: PxHere

Contractors, construction workers, and plumbers need protective gear in their kits. This includes hardhats, which protect your head from falling debris or construction tools on a worksite, eyeglasses, which can defend your eyes from chemicals or debris, and gloves, which can protect your fingers.

divider 9

Storage/Utility

Storage and utility solutions are essential for workplace efficiency and help workers move materials and construction tools from place to place.

37. Toolboxes and Belts

OX Tools Four Piece Construction Rig , Leather Tool Belt & Pouches

Practically every craftsman of every trade should have at least a toolbox or belt. Toolboxes have partitioned spaces for various tools and handles for easy carrying, and they’re usually quite tough on the outside. Tool belts are thick and sturdy and designed to support a variety of tools without putting too much pressure on their wearer.


38. Wheelbarrows

Jackson M6T22 M6T22KB Wheelbarrow

A wheelbarrow is a large container with a single wheel at the front and a pair of handles at the back. Workers can tilt the wheelbarrow onto the front wheel to maneuver it around a worksite to transport different materials like sand, concrete mix, and more. The back may be fitted with a pair of flat stands to let the wheelbarrow rest when it is not being moved.


39. Rolling Carts

WEN 73004 Service Utility Cart

A rolling cart is a maneuverable storage solution that you can use to hold bottles of grease, glue, or any other materials for easy access. Many carts also have locking feet for added security.


40. Workbenches

Olympia Tools Multi-Purpose Workbench With Light

A workbench is a waist-high table where contractors, plumbers, and DIYers can place their workpieces or tools to perform their tasks with more stability. Workbenches are usually characterized by flat surfaces and may include additional attachments like built-on rulers or levels. They may also have drawers or attachments for table saws.


41. Folding Chairs

Cosco Vinyl Folding Chair

Folding chairs are a good addition to a worksite if significant downtime is expected. You may also want folding chairs for your home workshop or for use with a workbench, so you don’t hunch over the bench and give yourself back pain after many hours of work.


42. Lockers/Cabinets

Fedmax Locker

Storage solutions like lockers and cabinets can provide long-term locations for a crew to store hats, construction tools, and other materials. These can be secured with locks, so a work crew doesn’t have to take their tools or other things home every day after their shift.


43. Lights

Olafus 60W LED Work Lights

Most worksites will need lights to illuminate the space, particularly for indoor environments or if construction must continue throughout the nighttime. Construction site lights often have long stands and can tower over workers. Smaller lights may be used with workbenches to provide illumination for home workshops or garages.


44. Buckets

Rubbermaid Commercial

Most worksites will need buckets to store water or other materials. Buckets have innumerable uses in that they can be used to transport material from place to place or act as temporary storage locations for screws, nuts, and bolts.


45. Utility Vises

TEKTON 4-Inch Swivel Bench Vise

An adjustable utility vise is a mechanical clamp with tightening mechanisms that can hold a device or piece of working material within its grasp. Once tightly held, a contractor can operate on the workpiece without it moving around and without having to use a hand to steady it. It’s perfect for sanding, cutting, chiseling, and much more.

You might also like:

divider 1

Conclusion

Many of these construction tools will be valuable as staple devices for most contractors, plumbers, construction workers, and even DIY home project enthusiasts. Hammers, saws, screwdrivers, and power drills are essential tools no one should be without, but some of the other tools, like jackhammers, are better suited for professionals or complex projects. Start or build upon your tool collection today!

Contents

Related posts

OUR categories

Project ideas

Hand & power tools

woodworking

Garden

Automotive